GT:Receiving Window Settings

From coolearthwiki
Revision as of 20:14, 3 May 2006 by 64.122.111.148 (Talk)

Jump to: navigation, search

Screen Settings (Ctrl-L)

UNTRACKED lot buffer days - inputfield
Whistle created-lots for untracked items will calculate the pull dates by adding the ERP shelf-life plus this buffer to the current system date.
TRACKED lot buffer days - inputfield
Whistle created-lots for tracked items will calculate the pull dates by adding the ERP shelf-life plus this buffer to the current system date.
Do not allow user to alter suggested lot. - checkbox
This option, when checked on, will not allow the user to change the lot field entry suggested by Whistle.
No Multiples - checkbox
When this option is turned on, Whistle will not allow the user to receive more than one pallet at a time.
Print Label Doc - inputfield
This field accepts the a Print Document Label name to be used instead of the default label file.
Prompt Prod date, calc pulldate - checkbox
Check this option if you would like Whistle to replace the Pull Date field with a “Prod Date” field and you would like Whistle to calculate the Pull Date based on the Prod Date entered.
Do not suggest qty. - checkbox
With this option checked, Whistle will not suggest default quantities for the quantity fields.
Print by default. - checkbox
With this option checked on, the print checkbox on the Receiving Window will be default checked as on.
Number of labels to print - inputfield
With a value placed in this field, it will become the default value for the number of labels to print for each print action.
Add Qty - checkbox
This option, if checked on, is used in catchweight implementations. It allows the quantity field to decode a UCC128 case label and sum the quantity of the case into the total quantity to be received. When using this feature, you can back out a quantity by keying in a negative number into the quantity field.
Clear pull prod date field between pallets - checkbox
With this option turned on, Whistle will clear the pull and/or production date fields after each receipt of a pallet.
Allow untracked labels - checkbox
This option, when checked on, will allow for untracked pallets to be given labels when printing occurs.
Suggest Putaway - checkbox
This option, when turned on, will have Whistle suggest a putaway bin for each pallet that is received.
Show Closed Lines - checkbox
Turning this option on will have Whistle display closed receipt order lines along with the open lines for viewing.
Setup Untracked - checkbox
This option, when turned on, will allow for the user to setup an untracked item as a tracked item by asking for the appropriate contain-pallet crossreferences.
Confirm Receipt - checkbox
With this option turned on, a confirmation message box will be displayed upon each successful receipt transaction.
Default Lot - inputfield
A default Lot code can be entered into this inputfield for all receipts.
Default Proddate - inputfield
A default Production Date can be entered into this inputfield for all receipts.
Return wt pallets with out creating new track. - checkbox
With this option turned on, warehouse transfer containers can be returned to inventory without the need to create a new pallet number.
Auto close lines in tolerance - checkbox
With this option turned on, the ERP system will be instructed to close order lines that are received within their quantity tolerance.
Confirm Extended Lot - checkbox
With this option turned on, any output that is associated to the container type “LOTUOM” for variable case-weight product will show a pop-up window showing the case weight and a number of additional extended lot parameters that can be edited prior to committed the transaction.
Email inexact receipts to - inputfield
With this option turned on, Whistle will send email notification to the input email address about receipts that are not exact.
Autohold - checkbox
With this option turned on, Whistle will place items to the appropriate inactive status that is reflected in their autohold setup.
Order creator cannot receive - checkbox
With this option turned on, Whistle will not allow the originator of the order to also be the receiver of the order.
Enable vendor label parsing - checkbox
With this option turned on, Whistle will add a field to the Receiving Screen for the user to scan a vendor supplied UCC128 label.
User selectable shelf life - checkbox
With this option turned on, Whistle will replace the pulldate field on the Receiving Window with a user selectable shelf-life field. The shelf-life options are pre-defined with ;Shelf-Life-Options screen setting (see below).
Shelf life options [15 Days-Fresh Aardvark|60 Days-Frozen Aardvark|90 Da] - choicebox. User selectable 
shelf-life options are entered here. The format is “XX Description |” where XX is the number of days, followed by the description and then the pipe “|” separator.
Parse Expiration From Case Qty Adder - checkbox
When this option is turned on, Whistle will display an additional field called the “Qty Adder” field. This field is for receiving catchweighted items and gives the user the option of setting the production date of the product from the cases that have been scanned for the product - with the oldest date being the date that will be used.
Allow PO line number specification - checkbox
When this option is turned on, the user is allowed to specify the line number for the PO.
Show Required Date By Line - checkbox
When this option is turned on, the Pulldate field will be visible in the line specification display.
Use only pre-printed labels - checkbox
The pre-printed labels contain a new tracking number, not yet tracked in Whistle. When this option is turned on, Whistle will prevent you from using the **NEW** designation. Instead, you should enter or scan in a pre-printed label.
Confirm new tracking number creation for pre-printed - checkbox
If the pre-printed label is for a track# that is not currently tracked in Whistle, a confirmation dialog will display when the new container is created.
Turn off printing - checkbox
When this option is turned on, the Print button is not available.
Parse line number from order field - checkbox
When this option is turned on, the line number is part of the order number. It is used to find the correct line on the order.
Append line number description to order - checkbox
When this option is turned on, the line number is appended to the order number.
Display Ambiguous Item Prompt - checkbox
Sometimes, it is not obvious which exact item has been selected. If this happens, a prompt will appear to let you know that you must clarify the item selection, to be more specific about which item or item/pack is to be received.
Auto-fill Ambiguous Line with pending receipt when possible - checkbox
If the user is being foreced to select a line, and the selected line is ambiguous, fill in the item information section with the order line information.
Misc recpt chep pallets in erp - checkbox
When this option is turned on, perform a Misc Receipt of any chep pallets into the ERP system.
Chep Pallet Item# - textfield
The item number to use for a chep pallet.
Chep Pallet Reason - textfield
The reason to use for a chep pallet.
Destroy DELETED pallets - checkbox
When this option is turned on, Whistle will remove the information about a deleted pallet from the database, rather than just moving it to a DELETED bin.
Allow consignment inventory? - checkbox
When this option is turned on, Whistle will allow you to receive consignment inventory.
Allow Warehouse Transfer Receipt? - checkbox
When this option is turned on, Whistle will allow you to receive warehouse transfers.
Show Layers and Parts - checkbox
When this option is turned on, display the Layers and Parts fields on the screen.
Allow receipt of zero priced lines - checkbox
When this option is turned on, the user is allowed to receive order lines that have a price of 0. An example would be a sample.
Make lot field sticky across orders. - checkbox
Once a value has been entered into the lot field, retain this value in the field for all the orders received, until the lot field is manually changed.
Print consignment receipt report - checkbox
If you are receiving consignment inventory, and this option is turned on, then you will print the consignment receipt report when the inventory is received.
Default Owner - textfield
Default value to put in the Owner field, if applicable.
Past Due Order Lookup limit (in days, -1 returns all) - textfield
Number of days to go back to find the past due orders. For example, if the value is 5, then limit the past due order lookup to all orders that are 5 or less days past due.
Default putaway bin - textfield
Default value to put in the bin to use for putting containers away after inventory has been received.
Copy waybill to userparam - textfield
Enter the column name of the user param that you want to store the waybill information in.