GS:Ship Window

From coolearthwiki
Revision as of 17:41, 27 June 2006 by 64.122.111.148 (Talk)

Jump to: navigation, search

The Shipping function allows the user to pick and fill sales orders that need to be shipped. Shipping and picking personnel will most often use this screen.

Shipping

Image:Shipping1.gif

Select ‘Shipping’ from the main menu to access the Shipping menu. This screen will also have a window-tab feature like Report Production and is accessed in the same way.

If you are shipping a Sales Order and you know the order number, just enter it. If you are shipping a Warehouse Transfer, or you are shipping a Sales Order but don't know the number, press the "Ctrl-A" keys. You will see a small options menu.

Image:ShipOrdMenu.gif

Select whether you are shipping a Sales Order or a Warehouse Transfer, by highlighting your selection, and pressing "Enter". Whistle will immediately look for all of the open SOs or WTs that need to be filled.

Image:ShpWnd1.gif


Use the arrow and/or tab keys to highlight the order that you want to fill. Press "Enter".

Whistle will return to the main shipping screen with the correct order number.

Note
Remember, if you just enter in an order number, Whistle will automatically assume you are shipping a Sales Order. If you want to ship a Warehouse Transfer, you must press "Ctrl-A", and select it in the menu.


Picklist

NOTE
Whistle must generate a PICKLIST for all Shipping Orders that you want to fill. A PICKLIST is a list of specific containers that are allocated to filling the particular sales order. Once you generate a PICKLIST, all conainers on the PICKLIST will be reserved for use by that sales order alone. The containers will not be able to be used for anything else.

If a PICKLIST has not been generated for this order, Whistle will ask you if you would like to generate one at this time. Select "<YES>" to generate a PICKLIST. Be patient, for this may take a little time.

Image:ShpWnd2.gif


The cursor will automatically move to the "<Pick Options>" option.

Image:ShpWnd3.gif

Press "Enter" to view a list of Pick Options.

You have 5 options...

Next Pallet

Image:ShipPickMenu.gif

Whistle is set up to automatically tell you which container to pick next. Whistle will automatically take you to the Picking Window. See that part of the user guide for more information.

Image:ShpWnd4.gif


Note
the selected container must next be loaded for shipping.


Choose From List

This option allows you to choose a particular container from the PICKLIST. The following PICKLIST screen will be displayed...

Image:ShpWnd5.gif


Select the desired Container to load it into the Picking Window. Again, see that part of the user guide for more information.

Image:ShpWnd6.gif

Print List

If this is selected, then the picklist is sent to the default printer.

Regenerate

This option will regenerate another PICKLIST.

Deallocate List

Use this option to release from hold all of the containers that are on the PICKLIST. This will destroy the PICKLIST. You will have to create another PICKLIST if you want to pick items for this sales order.

When you select "Deallocate List", the following message will be displayed.

Image:ShpWnd7.gif

"No" is defaulted. Select "<Yes>" to continue. The PICKLIST will be destroyed. When you look at the "<Pick Options>" again, you will only see one option, for generating the PICKLIST.


Over Quantity Pallet

You may receive the following message if the container you choose exceeds the quantity required to complete the order.

Image:Shipping17.gif

Select "<OK>" to clear the message and proceed to the main shipping screen. If you want to ship the exact quantity required, choose "<SPLIT>" to split the pallet and only ship the amount required. See the Pallet to Pallet Transfer section of this guide for details on how to split a pallet.

You have several options at this point:

LOAD

Select "<LOAD>" to load the container as it is. If the container’s quantity exceeds the quantity required for the load, you will be asked again if you would like to split the pallet.

Image:Shipping16.gif

Select "<YES>" if you would like to split the container. You will then proceed to the SPLIT PALLET screen.

SPLIT

Select "<SPLIT>" to split a pallet into two different pallets. See the Pallet to Pallet Transfer section of this guide for details on how to split a pallet.

Adjust Quantity

Select "<ADJ QTY>" to adjust the quantity located on the container. Only use this function if the quantity on the container differs from the quantity Whistle *thinks* is on the container. Whistle will take you to the Adjust Inventory screen. See that section of the user guide for details.

VIEW LOAD

Select "<VIEW LOAD>" to view what has already been loaded for this order.

Image:Shipping10.gif

Whistle will display a list of all items associated with the sales order that have been loaded.

Image:Shipping11.gif

Press any key to return back to the Shipping Screen.

UNLOAD

Select "<UNLOAD>" to unload a particular container that has already been loaded.

Image:Shipping12.gif

Enter the Track # or the Item # of the container that you wish to unload.


Image:Shipping13.gif


Select "<UNLOAD>" to process the unload transaction and return to the shipping screen.


LOAD

Select "<LOAD>" to load the container. The following message will be displayed if the container was successfully loaded:

Image:Shipping9.gif

Select "<OK>" to continue.

Whistle will default back to ‘Picking’ mode after a container is loaded into the system. It will automatically select the next container to pick. Repeat this Picking / Loading process until all items on the shipping order are loaded. Once all items associated with a Sales Order or Warehouse Transfer are loaded, a Supervisor will review and ship them. The shipping process may be repeated until all of the day’s orders are filled.

To Split a Container

Select "<SPLIT>" from the main shipping screen. You will be taken to the “Split Pallet” screen. See the Pallet to Pallet Transfer section of this user guide for more information on how to split a pallet.

You will be given the opportunity to load the container in the Shipping Screen. Notice that the quantity that you will be loading has been decreased by the amount of item that you have transferred off of the container in the Split transaction.

To Adjust the Quantity on the Container

Select "<ADJ QTY>" from the main Shipping Screen. You will be taken to the Adjust Inventory screen. See that section of this user guide for information on how to adjust the inventory in Whistle.

Image:Shipping24.gif


After finishing adjusting the inventoyr, you will be brought back to the main Shipping Screen to have the opportunity to load the container for shipping.


Ship Window Settings