GT:Report Production Window Settings

Window Settings (Ctrl-L, select Window Settings)

Report to Existing Cont - checkbox

The user is permitted to report production to an existing container, rather than being forced to create a new one.

Print Label Doc - textfield

This is the document detailing the label layout, including the file path.

Prompt Prod date, calc pulldate - checkbox

This option will display a Prod Date field, and use the entered value to calculate the pull date.

Allow reporting of by products - checkbox

Allow the user to report by products.

Number of Labels to Print - textfield

Default value is 1.

Lock Lot Field - checkbox

If this option is turned on, the lot field value cannot be changed.

Show Bulk Orders - checkbox

Default to on. Shows bulk orders.

Confirm Success - checkbox

When the transaction is successfully concluded, display a message.

No Order Matching - checkbox

If this setting is turned on, do not check to see if the order has previously been reported against.

Untracked Locn - textfield

Set up the location to put untracked inventory.

Number of User Params - textfield

Set up number of user parameters to display on this window.

Default Untracked Qty - checkbox

If reporting untracked inventory, default the quantity amount field.

Lock Date on Update - checkbox

currently unused

Max Days Back Dated - textfield

Maximum number of days the user is allowed to back date.

Setup Untracked - checkbox

If checked, user is allowed to setup untracked inventory.

Do not allow untracked - checkbox

User is not allowed to produce untracked inventory.

Confirm build - checkbox

After a pallet is successfully built, display a message.

Default Proddate - textfield

Default value for the Prod date.

Default Lot - textfield

Default value for the Lot.

Default Line for Lot - textfield

Default line to use for the Lot.

Un-backflush - checkbox

Undo backflush. NOTE: This setting is unrelated to Whistle backflush functionality.

Default to report new on existing - checkbox

If an order has already been reported, default the messagebox choice to Report New.

Default Putaway - checkbox

If on, set the Put checkbox field to checked.

Show bulk option - checkbox

Show the bulk version of the item in the selection list.

Do not suggest qty - checkbox

Do not default the quantity value.

Confirm Extended Lot - checkbox

Collect more lot information when this checkbox is turned on.

Suggest Production Order as Lot - checkbox

Default the Production Order as the Lot number.

Suggest Pre-certified Lot - checkbox

Default the lot field to the pre-certified lot.

Hide layers and parts - checkbox

Do not display the Layers and Parts fields.

Validate report to existing volume tolerances - checkbox

Suggest the amount of inventory that will result in a full pallet.

Use only pre-printed labels - checkbox

Do not create new pallets, use the pre-printed labels instead.

Confirm new tracking number creation for pre-printed - checkbox

When this setting is on, a message box appears to have the user confirm that the pre-printed label is for a new pallet.

Number of pallets allowed to create <0 = UNLIMITED> - textfield

Set the largest number of pallets the user is allowed to create at one time. Default is 0, which is unlimited.

Production Day begins on hour <0=12AM, 7=7AM> - textfield

Set the hour to begin the Production Day. Default is 0, which is midnight.

Auto-fill proddate - checkbox

Default the proddate to the current date and time.

Use real timestamp in proddate - checkbox

Show the actual time, rather than default to zeros

Use track number as lot number - checkbox

Use the track number as the lot number

Clear on okay - checkbox

Clear all the fields after the order is processed.

Default Owner - textfield

Default value to put in Owner field.

Default reason code - textfield

Default value to use as the reason code.

Append Group Code to Reason Code - checkbox

Not used.

Default line (Parity) - checkbox

When this setting is turned on, the production line that is being reported against will remain on the screen until another line is selected. Currently only available to users with the Parity ERP system.

Default shift - checkbox

When this setting is turned on, the shift value will be retrieved from the database.

Save start time in userfield one - checkbox

Save the Start Time value in user param one.

Save prod line desc in userfield two - checkbox

Save the Product Line description field in user param two.

Save pallet number in userfield three - checkbox

Save the pallet number in user param three.

EV certify primary outputs - checkbox

Certify the primary outputs.

Update by Track - checkbox

When on, the user can update an existing report production by entering a track #, which will be used to find the order.

Save production lot in userfield four - checkbox

Save the production lot (a user created value) in user param four.

Save production misc info in userfield five - checkbox

Save misc production information in user param five. Currently not used.

Save first part of bcs barcode in userfield six - checkbox

Save the first part of of the BCS barcode in user param six. Currently not used.

Save last part of bcs barcode in userfield seven - checkbox

Save the last part of of the BCS barcode in user param seven. Currently not used.

Default lot to last digit of prod year + 3 digit Julian day - checkbox

Set the default value of the lot field to the last digit of prod year + 3 digit Julian day.

Prevent entry of future dates in Prod Date field - checkbox

When this option is turned on, the Prod Date field will not allow the entry of future dates.

Require ERP lot creation - checkbox

A lot will be created, if one does not already exist.

Collect Production Line - checkbox

Have the user enter the production line information.

Set Lot Hold Code if QC Tests exist - checkbox

The lot hold code will be set if there are QC Tests set up for this lot.

Override Use Tran Date for Adage 4.5 TEE setting - checkbox

This setting will override the setting Use Tran Date for Adage 4.5 TEE.

Collect Kill Date - checkbox

Collect the kill date information.

Use Lot Extension table for Kill Date - checkbox

When collecting kill dates, get information from the lot extension tables.

Select Shelf Life at 0) Default 1) Co 2) Whs 3) Ent level - textfield

Enter in a 0, 1, 2, 3 to indicate where the shelf life information will be retrieved from.

Show KillDate after Lot message is displayed - checkbox

If collecting the kill date, then show the kill date to the user after the lot creation message has been displayed.

Check Backflush Before Reporting Production - checkbox

FOR ADAGE BACKFLUSH ONLY - check to see that there are sufficient levels of backflushable inventory for this order before reporting production. NOTE: This setting is unrelated to Whistle backflush functionality and should likely be OFF when using Whistle backflush functionality.

Select Kill Date from List - checkbox

If collecting the kill date, make the user select an existing kill date from a list of dates, do not allow them to create a new one.

Lot Number Format - textfield

Enter a 1 to create a lot number in the pattern of PPYJJJHHSSSS, enter a 2 to create a lot number in the pattern YYJJJPPL.

Use oldest input expiration date for pulldate - checkbox

Use the oldest expiration date on the issued pallets as the pull date for reporting production.

Configuration value for TrxQueue (Whistle Backflush) - textfield

This is the name of the queue to which Whistle GT will post backflush transaction requests. The default value of “Global/Main” is appropriate in most situations. (See Whistle backflush documentation for further details.)

Rollback transaction if insufficient Whistle backflush inventory - checkbox

The report production transaction will rollback if there is not enough inventory to fully backflush for the selected output for the selected order.

Permit User Override of Whistle Backflush Rollback Policy - checkbox

If Rollback transaction if insufficient Whistle backflush inventory is enabled and there is not enough inventory to fully backflush, the user can chose whether or not to rollback the report production transaction.

Mark Partially Whistle Backflushed Items Complete (SoftFail) - checkbox

If there is less than the total amount of inventory necessary to fully backflush the selected output on the order, the system will backflush what it has, mark the output as completely backflushed, and make note of the total shortage on the Backflush Historical Discrepancy report.